ITX Plus Series

Universal, Loop Powered, Isolated, Signal Converters

The ITXPlus is a truly universal, compact, loop powered, isolated, signal converter. You can program it to suit most input signals. It will measure, convert, filter, and isolate the signal and provide you with an industry standard 4-20mA output.

For temperature measurement, you can use any thermocouple or RTD type. There is lead length compensation for 3-wire and 4-wire RTD and resistance measurements as well as a highly responsive automatic cold junction compensation method for thermocouples. The ITXPlus will also accept resistance, potentiometer (position), millivolt, milliamp or voltage signals. You don’t even need to recalibrate.

The program has inbuilt square root, linear, x1.5 and x2.5 transfer functions or you can set up a table of input/output values to characterize any unusual curve.

Features: Universal Input Converts, filters and isolates most common signals and sensor types Fully isolated Loop powered Automatic CJC for thermocouple inputs Automatic lead length compensation for RTD inputs Sensor burnout detection Preset and user-defined linearization

Select to view Technical Data

STG

Auxiliary Powered, Strain Gauge Converter

The STG converts the signal generated by a resistance bridge strain gauge to a standard analogue signal format. It has a remote sensing, bridge power supply that provides a highly stable bridge excitation voltage regardless of any cabling resistances between bridge and the input terminals.

TARE adjustment controls and test points allow for easy adjustment to suit initial bridge loading. The housings clip directly onto both 35mm ‘Top Hat’ rail and G-rail without modification.
 

Features: Remote sensing bridge power supply provides highly stable excitation voltage True voltage/high drive capability, analog outputs Highly accurate (0.1% of span) Removable, screw type, terminal blocks Front panel test points Easy to use DIN and G rail mounted

Select to view Technical Data

Micromann AR Series

Universal, Auxilary Powered, Isolated, Signal Conditioners with Alarms

Micromann AR series transmitters and alarms provide you with a truly flexible, multifunction interface between industrial plant and control room equipment. Designed for signal isolation/conversion they also have dual SPST (NO) relay alarm outputs for process monitoring applications.

Each model covers a range of similar signal and sensor types. Versions available include: analogue current/voltage; temperature (thermocouple and RTD); frequency; conductivity; curve lineariser/characteriser; maths function; etc.

In common with all Micromann series units they have a four digit display, which you can scale to read in any engineering unit. All parameters then work off the displayed value. The user friendly software makes setting up operating parameters very easy: simply choose the settings you need using the display and the tactile keypad.

Features: Programmable current/voltage output Two versatile alarm channels with LED status indication Display in engineering units Complete isolation Easy to use Change configuration without need to recalibrate No internal adjustments needed

Select to view Technical Data

The housing clips onto both DIN and G rail. Wiring connections are by plug-in connectors on the front of the instrument.

The Micromann Series is cULus Listed, CE Approved and complies with the RoHS directive for hazardous materials reduction.

Micromann UPI Series

Analog to Frequency Converters

Micromann UPI series units accept analogue current/voltage signals and convert to a proportional output frequency with inbuilt linearization for square law signals and programmable low cutout to prevent accumulated errors at low frequencies.

A power supply connection is provided for a loop powered transmitter or other active input device. They also have a single alarm channel for basic signal level monitoring applications. In common with all Micromann units they have a four digit/character display, which you can scale to read in any engineering unit. All parameters then work off the displayed value.

The user friendly software makes setting up operating parameters very easy: simply choose the settings you need using the display and the tactile keypad.

Features: Convert current/voltage signals to proportional frequency output Power for active input devices Low cut-out and linearisation for square law signals Single alarm channel with LED status indication Display in engineering units Complete isolation

Select to view Technical Data

The housing clips onto both DIN and G rail. Wiring connections are by plug-in connectors on the front of the instrument.

The Micromann Series is cULus Listed, CE Approved and complies with the RoHS directive for hazardous materials reduction.

top back